MAC OS X 10.5 Leopard is a completely unique OS platform and as a user, you should be able to setup PPTP and L2TP VPN on MAC OS X 10.5 Leopard because only then you could make use of the VPN service effectively. If you are using a different MAC OS operated laptop, then you should be aware of the fact that 10.5 Leopard is a completely different and all new platform. There is a separate setup procedure for this and you should follow that in order to establish a proper VPN connection. If you are using PPTP or L2TP VPN, then you should look into the setup procedure that we are giving here in order to setup VPN on your device successfully. The VPN service provider that you choose should provide either of these two VPN protocols in order to setup VPN on your MAC OS X 10.5 Leopard.
PPTP and L2TP VPN on MAC OS X 10.5 Leopard
There is not much difference in the setup procedures of PPTP and L2TP on MAC OS X 10.5 Leopard. Follow the instructions given below in order to setup VPN in a blink of an eye.
- Select System Preferences.
- In the ‘Internet and Network’ section, select the option of ‘Network’.
- In the bottom left screen, click on the ‘locked icon’.
- Administrator information i.e. Name and Password should be entered in the respective fields.
- After that, select ‘+’ which will be in red.
- Another window will appear.
- In the resulting window, select ‘Interface’.
- In the new menu page, select the option of ‘VPN’.
- Type of VPN should be set to PPTP VPN. If you are using L2TP IPSec VPN then you should select the option of L2TP IPSec VPN here.
- Service name should be the name of the VPN service provider.
- Select Create after this.
- VPN specific information such as IP address, username and password should be entered in the appropriate fields.
- Configuration should be set to ‘Default’.
- Encryption should be set to ‘Automatic’.
- All the account particulars should be entered correctly. Welcome email consisting of all the account specific details will be sent to you by the VPN service provider.
- Select ‘Authentication Settings’ after entering all the account particulars.
- VPN password should be entered, and then click OK.
- Select ‘Advanced’.
- Make sure that the options ‘Send all traffic over VPN connection’ and ‘Show VPN status in menu bar’ are checked. Select Apply after that.
- Setup process is complete. Click on ‘Connect’ to establish the VPN connection.
By following these 20 steps, users could connect to the VPN very easily. Setting up PPTP and L2TP VPN on MAC OS X 10.5 Leopard is made easy for you.
Best 5 VPN service providers
Before you go ahead setting up PPTP and L2TP VPN on MAC OS X 10.5 Leopard you should make sure that you choose the right VPN service provider. In the table below, you could find the top 5 VPN service providers.